General ESR fault.

[Adam1984]

Hello,

So this morning I had my first error come on the screen which says ESR error illuminated and then hill holder unavailable.

I turned the engine off and it vanished, but a minute later it came back on again. And keeps doing the same now every time.

Has anyone had this issue and know what's causing it or the fix please?

Thanks.

 

[koalar]

You have multiecuscan

Connect to the body computer and abs modules and read the codes instead of guessing

It usually the brake switch, it has two separate tracks so you can't tell 100% by looking at the lights

Normally it can be readjusted

 

[Adam1984]

You have multiecuscan

Connect to the body computer and abs modules and read the codes instead of guessing

It usually the brake switch, it has two separate tracks so you can't tell 100% by looking at the lights

Normally it can be readjusted

All sorted. The brake pedal switch wasn't connected properly. All sorted and now fixed. Thanks.

 

[Mike1alike]

You can use some contact spray on that connectors. Unplug it and spray both sides.