Technical EBC GreenStuff Pads

[Forza]

Hi, fitted green stuff, and screeching.......this is after fitting with shims and lots of copperease.

Guess i will have to wait for them to bed in as TJet180 says???

 

[dave]

too much copperease can be as bad as too little

 

[DlightSwitch]

Yeah with just a thin layer of copperslip on the edge bits that Dave highlighted before, mine no longer squeak under braking. I didn't put any anywhere else.

 

[dave]

i put it on the 2 bits of calliper that touches the pad/shim and on the piston rim too, but very sparingly, i thought others covered that above. 1 tube of copperease should last years and years (home use) unless you forget where you put it

 

[DlightSwitch]

i put it on the 2 bits of calliper that touches the pad/shim and on the piston rim too, but very sparingly, i thought others covered that above. 1 tube of copperease should last years and years (home use) unless you forget where you put it

I didn't bother as they all touched the shims, but if I get any noises I'll give it a try.

 

[Forza]

too much copperease can be as bad as too little

Never heard of that, but experience is golden. I will try a little and not as much and see-hear the outcome.

 

[ChrisUK]

I just cake it on tbh. Never caused anything negative to happen in 5 years and 120,000 miles.

If anything it stops the outside of the pads rotting with all the road salt during the winter .