Styling Door panels

[DezMcIcK66]

I have just purchse some carbon fibre wrap so I can place on the black window panels aslo the door mirrors panels , can I remove these so I can wrap them off the car??

 

[toby14692]

Not entirely sure myself. But if you get it done would love to see a couple of photos. Contemplating this myself

 

[Davren]

Not sure what you mean by "black window panels", but there's a guide to removing the door mirrors here: https://www.fiatforum.com/stilo-guides/204876-how-fit-m3-mirrors.html
.

 

[DezMcIcK66]

I meant the b pillars on the 5 door

 

[Davren]

I meant the b pillars on the 5 door

Never taken one of those off. I was going to replace one of mine a few years ago but read in the workshop manual you have to take the glass out, so I didn't bother.
.

 

[gadge]

I've done mine I didn't need to take it off, however I did remove the rubber strip that goes underneath the window which, when removed reveals the bottom inch of the B post. Once you've cut the carbon wrap to a slightly bigger shape than the B post you just simply apply it on carefully, then heat it slightly and trim it to size with a Stanley knife (ask an appropriate adult ) then refit the window rubber strip and stand back and admire it makes it look soooo much better

 

[sharkytaylor]

I've done mine I didn't need to take it off, however I did remove the rubber strip that goes underneath the window which, when removed reveals the bottom inch of the B post. Once you've cut the carbon wrap to a slightly bigger shape than the B post you just simply apply it on carefully, then heat it slightly and trim it to size with a Stanley knife (ask an appropriate adult ) then refit the window rubber strip and stand back and admire it makes it look soooo much better

Any pics of how much better it looks ?