Technical Dogbone Mount Bolts

[robkerrigan]

Does anyone know the part numbers for the bolts for the dog bone mount please? Had a look on ePer but not too clear. For a 1.3 Multijet 4x4

Cheers,

Rob

 

[Eltezz]

There you go…

MJ dog-bone

 

[robkerrigan]

There you go…

MJ dog-bone

Thanks Eltezz, it's the part numbers for the bolts I'm needing, the diagram on ePer isn't very clear

 

[Eltezz]

All the bolts seem to be visible in eper. Which ones are you having trouble with?

 

[robkerrigan]

Is it parts 5, 6 & 9 and 3, 6 & 4 I need? Not sure where parts 7 & 8 are used. Basically I'm replacing the dogbone and would like to use new bolts to refit

 

[Eltezz]

Ok, with you now. My old MJ 4x4 still has the VIN in ePer but when I look at that page it shows 1,2 3 8 and 9. Number 3 three off and one of all the others. Not sure that is right!

It might be wise to have a look and see exactly what you have fitted to the car then decide what bolts/nuts are needed based on location. Shop4Parts may have an idea if you ring and ask them…