does any 1 know to take the painel in front of the manometers

[FleshMan]

does any 1 know how to take the plastic panel in front of the manometers and in the air exit in right I wanted to paint that in gray but cant remove the plastics.i know how remove the allen screws but wen it comes to the part of the air exits in both sides i jam.
please help.

 

[mcgregor robert]

facia removal

i think you mean the plastic screen in front of the speedo clocks.
if you have removed all of the allen bolts and you are only stuck on the air duct vent you are almost there if you remove the fuse box panel and look under and up at the vent you will see a small screw if you remove this the top of the vent is just clipped into place slide a thin screwdriver in above the vent to loosen this being carful not to damage the panel and with a little perseverance and a bit of pulling (and swearing)the panel will pull off giving you full access to do as you please.
hope this helps.