General Doblo sliding door handle repair

Currently reading:
General Doblo sliding door handle repair

brom

Member
Joined
Sep 2, 2008
Messages
67
Points
83
It seems to be very common for the Doblo's sliding door handle to break away at the front, especially when the door has been frozen. Both my 2009 Doblo, and my son's 2008 version have suffered this recently, coincidentally on the offside.

Replacements seem to be expensive (£120+VAT for a genuine part). However, my garage felt there was a cheap and simple repair alternative. They drilled through the plastic disc where the key barrel would be, (if there were a lock), and bolted the handle to the inner door panel with a coachbolt. They finished it with sikaflex, and I have now topped the bolt with a plastic domed cover, (M8, 13mm, bought on ebay for £1.99 for a pack of 8), also sikaflexed in place. Totally sturdy, and will never pull away again.

Photo herewith, before capping the bolt. (Hope I've been successful in adding the pic!)
 

Attachments

  • Doblo door handle.jpg
    Doblo door handle.jpg
    459.3 KB · Views: 895
How did they get the panel of inside I have tried to get a workshop Manuel my door handle went last week and looks brittle and weak.

Thank you for the tip I will be drilling tomorrow.
 
Hello @brom,

This just happened to me as well. Could you detail how they accessed the internal panel? Did they have to take it off? Thanks.
 
Sorry, I can't remember! I will speak to my Garagist and ask if he can recall. If so, I'll come back to you.
 
Back
Top