Technical do mk1 ut parts fit mk2ut

[jsyuno]

hi guys im after some help.iv got a few mk1 uno turbo parts and was woundering if they fittid the mk2 uno turbo.iv got a cam of the mk1 and stage 2 head.also im having trubal finding a turbo for my mk2 1990 does any1 no the measurements of the part that the turbo bolts on too so i can try and find a turbo that i can fit too it any help would be very helpfull thank you

 

[the mk1 kid]

Hi,

Turbo > manifold bolt spacing from memory (if i am right i am very sad!) is 40mm (short side) and 73mm (long side) - i dont know the diagonal length, but its a rectangle, so that you could even work out with trig!

You might have to unbolt the compressor to change the direction it 'fires' if you catch me.. not a big issue but worth considering too - is there nothing about? Have you been on turbo collective?

The mk2 cam does not have a slot in it so wont fit the mk1 unless its machined.

The heads can be swapped i think, (i forget) but i'm sure you have to change something else too.. not the best on that one!

Tom