General Diesel Heater

[bryan]

Has any body fitted a -t- piece into there fuel line for feeding a diesel heater for a motorhome and would it be fitted before or after the fuel filter, fiat 2.3 multijet 2013/14

 

[corcai]

Lift pump put out 3-5 Bar. Its unlikely your diesel heater is designed to take that pressure. OEM usually has a standpipe built into the lift pump swirl pot, aftermarket usually uses a bolt in job e.g. https://www.ebay.co.uk/itm/EBERSPAC...270469&hash=item4aceb0f6ad:g:6lsAAOSwImRYPrE2

 

[whine0]

Hi just to add the low pressure fuel lines are hardened plastic so you would struggle to stop your t piece leaking the part listed by corcai looks perfect for the job

 

[bryan]

Lift pump put out 3-5 Bar. Its unlikely your diesel heater is designed to take that pressure. OEM usually has a standpipe built into the lift pump swirl pot, aftermarket usually uses a bolt in job e.g. https://www.ebay.co.uk/itm/EBERSPACHER-OR-WEBASTO-VW-T5-T6-HEATER-FUEL-TANK-SENDER-STANDPIPE-KIT-E7162/321295283885?epid=650270469&hash=item4aceb0f6ad:g:6lsAAOSwImRYPrE2

Put my details in will not fit to any of the ducato marks, I did recieve a unit to fit in the tank but was not to sure about fitting It, The thought of cutting a hole in the tank put me off, sorry for not respondin earlier, Thanks Bryan

 

[bryan]

If the tee piece was fitted before the fuel pump would this reduce the pressure, allso what colour pipe would I need to connect too the yellow or the green connection from the fuel tank. Thanks in advance this time, Bryan