Tuning Custom MPI Inlet Manifold

[Jube]

Hi All,
Does anybody have any advice or ideally pictures of a custom inlet manifold fitted to a Seicento/Cinquecento 1242 8v MPI engine please?

I've read the following excellent fingers99 and Brooky plenum threads but they don't unfortunately show the finished article:

https://www.fiatforum.com/cinquecento-seicento/162651-blues-plenum-chamber-so-far-pictures.html

https://www.fiatforum.com/cinquecento-seicento/174651-inlet-manifold-revvy-p75-motor.html

I'm planning to fit a plenum chamber to a modified spare P75 inlet manifold I have and then fit a single larger throttle body to it. This will then be fitted to my Seicento Mk2 which has a P75 engine conversion.

Any assistance would be very much appreciated.

 

[craigb244]

doubt any of them where ever finished...

usually the way things go... start with good intentions but get bored

 

[Jube]

That's a shame, thanks for the reply.

 

[Brooky]

I don't know what happened to the inlet, I just did the machining for John.

If you can weld and machine ally then there not hard to make.

If you look on elaboris's site (don't know if that's how you spell it) there's some custom inlets on there.

 

[Jube]

Thanks for the info, I'll have a search on the elaboris website for some pictures now.