Technical Clutch for a tuned 1.2 8v (non-turbo)

[Crashtest33]

Hi all.

After a new clutch for my decent engine. I have a 2.8kg TTV flywheel but my engine balancer needs a clutch plate.
Need something perfectly good that would handle reasonable torque and power.
Noticed AP Racing don't cover fiat at all.
Anyone seen the DriveTorque stage 1-3 on eBay?
Any recommendations.

Thanks chaps.
Happy new year!

 

[Lecook]

A 200mm flywheel with a decent quality clutch will do you fine my 1242 turbo runs the stilo flywheel with a valeo clutch..

 

[Brooky]

I've got a CG Motorsport paddle clutch for mine

 

[Crashtest33]

A 200mm flywheel with a decent quality clutch will do you fine my 1242 turbo runs the stilo flywheel with a valeo clutch..

I've already got the flywheel. A 180mm TTV steel billet 2.8kg version.

 

[Crashtest33]

Would a new Punto GT clutch be any good??

 

[Brooky]

You'd have to check the splines/pressure plate mounting.

An uprated 180mm clutch should be up to the job on a revvy n/a motor.

Don't know what the flywheel is like but could you modify it to run a 190 or 280mm plate? Run a bead of weld on the outer diameter of the friction surface and machine it back?

Or get another flywheel made if it's going to be an issue

 

[Crashtest33]

An uprated 180mm clutch should be up to the job on a revvy n/a motor.

Any 180mm suggestions?

 

[dac69er]

on my tuned 1.1 8v cinq i just fitted the cheapest clutch kit i could find off ebay. was about £35 delivered for the whole thing.

i have done multiple track days with it and its holding up fine. it gets a little juddery in the winter, but what can i expect for £35

i would just get any decent quality clutch and it will hold fine.

 

[MrDerv]

A standard Valeo clutch will do the job fine on an N/A application.

 

[Brooky]

Omp, Helix, CG Motorsport, black diamond, Bacci