ClaireMatt
New member
I had a Light bulb fail on climate control cluster. I removed the front panel and replaced bulb then refitted the fascia. The control dial for the hot/cold air (far left) didn’t work. I removed the facia panel and noticed the spigot had pushed back into the unit and was stuck. I managed to release it and pull it forward and the refitted the facia for the 2nd time. Now the fan would only blow cold. So again I removed the facia and decided to push the spigot back into the unit, twist and pull out and refitted the fascia panel for a 3rd time. Now the fan will only blow hot. I’m now at a loss on how to rectify. Any suggestions?
