Technical Central Locking Diagram

[Stfakdj]

Can someone tell me where are located "connector blocks"?

 

[koalar]

Left hand drive but should be close enough

Home Page

aftersales.fiat.com

 

[Stfakdj]

Left hand drive but should be close enough

Home Page

aftersales.fiat.com

Hi, thanks for you reply. I am not sure but it should be under driver's seat?

 

[judderbar]

an interesting url. I checked on my left hand drive car. Those connections D097 a and C must be in the cross member that the front of the front seat is connected to. There are a large number of wires passing into that cross member from the left hand side.

 

[Stfakdj]

Thanks for the reply, i will check it out!

 

[Stfakdj]

One more question, can something fail in those connections D097 and C? Or are they just copper blocks?

 

[judderbar]

One more question, can something fail in those connections D097 and C? Or are they just copper blocks?

go to that link provided by koalar and select wiring diagram. It shows you i think the colour codes and pinouts for the door connectors which you can open to test if the d097 connectors are working. The haynes version does not show the door connectors.

 

[Stfakdj]

go to that link provided by koalar and select wiring diagram. It shows you i think the colour codes and pinouts for the door connectors which you can open to test if the d097 connectors are working. The haynes version does not show the door connectors.

I checked that already, but I don't know what it should be like. I got approximately -12V on both wires, and when I lock/unlock the car, it briefly goes to 0V while the doors are locking/unlocking, then returns to -12V.

 

[koalar]

I not had a punto for around 20 years so not sure how much help I can be

The wiring on Elearn is in italian

Fictional discription and wiring in the link below

PrintAll

 

[Stfakdj]

I have found wires but this is useful in future, thanks!