Technical carb solenoid

[pound]

Hi
MY Panda 1000CL (fire) with weber 32 is giving me a headache.


The carb solenoid is screwed. So when I manually push it in the car runs fine for a while until it works its way out and then starts to not idle ect.


Anyway this item is hard to find and the online crooks

I'm coming across want way too much for something that should cost only £5 - 10 max.


Any suggestion

where I can find one for a reasonable price?

 

[kolza]

I've seen new ones on ebay for approx. £37+£4 postage

Cheapest way is just to cut the tip of broken one.

 

[Dragon Man]

if you are on about the little electric thing the white cable plugs into, just take it out the carb and cut the end off it with a good pair of pliers or wire cutters.. then just put it back in the carb to plug the hole up.

its only in the carb to help prevent over run when you turn the engine off. otherwise it does not really have any use.

the one on my panda 4x4 has had the plunger cut off and it works like a dream now

edit.. sorry i didnt read kolza's post