Well where do i start and this is a question for any other det's,and i thank you in advance for replying or ringing me.
58 plate bravo was driven for body repairs,had o/s f wing, door skin,bumper,arch lining not much more.
Body shop towed it to us to look at engine spins over no start.Here we go:
u0422 fault inertia function,pretty simple but wont stop it starting,performed body computer reset and flash update for egr and it disapeared..no errors in any section,still non start
checked inertia switch inside car,has low pressure from pump BUT and a big one no high pressure to rail or injectors not even a drip.
Have put ecu on another bravo 1.6 mjet 16v and it starts that car so we know ecu is ok..
all fuses checked and double checked and fuel relays changed.
any advice would be gratefully appreciated as some one has mentioned the airbag ecu can stop it starting,altho no errors in airbag?
reply or phone...
regards drino
mob;07534 402806
58 plate bravo was driven for body repairs,had o/s f wing, door skin,bumper,arch lining not much more.
Body shop towed it to us to look at engine spins over no start.Here we go:
u0422 fault inertia function,pretty simple but wont stop it starting,performed body computer reset and flash update for egr and it disapeared..no errors in any section,still non start
checked inertia switch inside car,has low pressure from pump BUT and a big one no high pressure to rail or injectors not even a drip.
Have put ecu on another bravo 1.6 mjet 16v and it starts that car so we know ecu is ok..
all fuses checked and double checked and fuel relays changed.
any advice would be gratefully appreciated as some one has mentioned the airbag ecu can stop it starting,altho no errors in airbag?
reply or phone...
regards drino
mob;07534 402806
