Brittleware
Member
I've read that a source of the "airbag fault" warning can be the connectors under the seats. On ours, the passenger side one cable has been hard wired (two very slim wires, one mauve/lt. green though there's still a black connector block). Looks like a repair rather than an attempt to connect the airbag.
The driver side has a white block and no sign of modification. Wires this side are black/white.
In any case aren't the airbag cables the ones that disappear up towards the bags? There's no connector block for them on either seat... there must be cables for the bums on seats switch, triggering the seat belt warning. Is all this lot multiplexed?
Anyone got a wiring diagram for the Ulysse/C8/806? Thanks!
The driver side has a white block and no sign of modification. Wires this side are black/white.
In any case aren't the airbag cables the ones that disappear up towards the bags? There's no connector block for them on either seat... there must be cables for the bums on seats switch, triggering the seat belt warning. Is all this lot multiplexed?
Anyone got a wiring diagram for the Ulysse/C8/806? Thanks!