Technical Airbag Clock Spring Help

[wbarge]

Evening all,

I had bought a new clock spring for my 2017 Doblo cargo, and once I had taken the old one off, I noticed one of the two connectors was different .

The one on my van has a far larger connector, typical scenario, van now useless and I just can find a new clock spring to match the old one.

There is a bar code on the old one with 25923.7.093.8496, but I can't find references to this anywhere.

Any help to find the correct part would be very much appreciated

 

[the green vanper]

Hello,

That doesn't look like a FIAT part code.

Do you see any other stickers?

 

[ceecff]

That code is from part manufacturer, not Fiat code, seems it's Delphi part. You must check Fiat part from workshop or Delphi using VIN. Example 735606795 or 59001158.

 

[the green vanper]

That code is from part manufacturer, not Fiat code, seems it's Delphi part. You must check Fiat part from workshop or Delphi using VIN. Example 735606795 or 59001158.

ePER should list the FIAT part number. Link is on the bottom of the forum banner.

 

[ceecff]

Yeah but online ePer is a few old for these cars, part number will be wrong and full module, not ring only.
Check if any code here too.

https://i.ibb.co/fzxg11Jq/20250707-090819-2.jpg

 

[the green vanper]

The forum ePER covers this generation of the Doblo. So it is likely the number will be correct. Could be eventually a previous variation of the element, but it will already be easier to find.

 

[wbarge]

Hello,

That doesn't look like a FIAT part code.

Do you see any other stickers?

Afraid not.

 

[wbarge]

Thanks everyone, your help has been very much appreciated, I have made some progress but I am still hitting the same issue. The issue is my black second lead has 8 wires running into it, the replacement is white and only carries 2.

Replacement part numbers are 46776828 and some success with POM59001157

I will keep trying

 

[jackwhoo]

Ring coastal motor homes
Have vin ready