6X9 Noise

[Brad G]

Hey guys i will try explain this best way i can XD

Basic im running vibe slick 6x9 on my parcel shelf in my 2001 punto sporting. I have a 2 amps. A Vibe A0 450watt + alpine 700watt. Now i have a JVC headunit that has a single pair of RCA cables ran to the back of boot. These RCA cables are connected to the vibe amp which is running my 6x9. Ive then got a 2nd RCA cables and plugged them into the OUT of the vibe amp and IN on the alpine amp which is powering my Vibe Slick 1200watt sub. Now when i put my car igniton on the 6x9 make a BBBEEEEEEEE noise and goes off when either the igniton is turned off or the cables are pulled out the 6x9 the - +. Or when i remove the RCA that are on the OUT of the vibe amp. when the DVD facia is attached to the stearo and turned on when the car is on the beeee stops. When the music is playing you can still here a slight BEEE in the background.


ANY Ideas???

 

[volxstu]

Have a search for Ground loop.

 

[Brad G]

Have a search for Ground loop.

what u mean ground loom? make sure its properly grounded?

 

[volxstu]

Ground Loop and I meant use the search function in here. The subject has been covered quite a bit and should give yu the answer. If not then come back and well see what you havnt done.

 

[Brad G]

Ok got the ground sorted. The beee noise is now only happening when the stearo is off??When the stearo is on there is no beeee. How can i get around this? as when i pull the RCA out from the Vibe amp thats going 2 the sub the beee stops