Styling 5 x stud alloys that fit a 2012 Doblo

[maxthedoggy]

What standard Fiat or Alfa 16" alloys would fit my 2012 Doblo ? I've done a search but everything seem to point to the 4 stud versions.

Cheers guys

 

[Meska77]

What standard Fiat or Alfa 16" alloys would fit my 2012 Doblo ? I've done a search but everything seem to point to the 4 stud versions.

Cheers guys

Hey there, use this link https://www.wheel-size.com/size/fiat/doblo/

Pay careful attention to the PCD, Offset and width. Also make sure the centre bore is the same.

I think most commonly 5 stud doblos are pcd 5x98 7j with a 35mm offset.

I have used alloys similar to these off an alfa 156 http://www.ebay.co.uk/itm/Alfa-Rome...366855?hash=item465f1bc7c7:g:N90AAOSwTuJYvIZl (!!! Please don't bid on these without checking the sizes first as I have not. !!!)

 

[Meska77]

you can also go to 17". I have 17's on my doblo and there is plent of clearance for calipers, suspension and turning on full lock. It looks like you could even go bigger than 17 however, do this at your own risk as I haven't tried it and not seen it recommended anywhere.

 

[maxthedoggy]

Cheers lads for all the help, much appreciated

 

[maxthedoggy]

Just a bit of an update, I've bought a set of four 16" alloys of a Alfa 147, they are fitted with 205/55's and they sit well, nothing catching or rubbing, I'm going to get the wheels refurbished in gun metal gray before fitting them properly

 

[Meska77]

Let me know how you get on if you get your wheels aligned. I took my van to a garage last week and they did the alignment but wouldn't do the camber because they weren't the stock wheels.

The mechanic was a massive arsehole so it could just be that garage.

 

[maxthedoggy]

Will do bud, I'm going all out and getting the wheels refurbished in gun metal grey before fitting etc, I'll post a pic when on.
Cheers lads