Hi There,
I have a 2015 Fiat Panda Easy. It recently had the dual mass flywheel and clutch replaced after dualogic issues.
Its been been running perfectly since, however if I accelerate enough and it needs to downshift from 5th to 4th, it jumps to N.
I have to coast to a stop and engage 1st.
I've noticed it only does this in Auto - If I manually shift it down it works fine. Its working perfectly on all other shifts in both Manual and Auto.
If its in 5th, and I come to a hill but maintain consent throttle, as the revs drop and it shifts down, it works fine.
It only has this issue when dropping down under acceleration.
I realise this could be a number of things, but because the issue is isolated to this exact scenario, I'm hoping to narrow it down.
Thanks
I have a 2015 Fiat Panda Easy. It recently had the dual mass flywheel and clutch replaced after dualogic issues.
Its been been running perfectly since, however if I accelerate enough and it needs to downshift from 5th to 4th, it jumps to N.
I have to coast to a stop and engage 1st.
I've noticed it only does this in Auto - If I manually shift it down it works fine. Its working perfectly on all other shifts in both Manual and Auto.
If its in 5th, and I come to a hill but maintain consent throttle, as the revs drop and it shifts down, it works fine.
It only has this issue when dropping down under acceleration.
I realise this could be a number of things, but because the issue is isolated to this exact scenario, I'm hoping to narrow it down.
Thanks
