Technical 2012 onwards service manual

[philboo]

I have looked on the forum and searched online for eper ? but cannot find a service manual for the newer 2012 onwards panda.

I want to look for dashboard dismantling and also a part from an exploded view of the area around the windscreen scuttle.

Does anyone have a copy or know how I can view this online ?

Thanks

Phil

 

[babbo_umbro]

I have looked on the forum and searched online for eper ? but cannot find a service manual for the newer 2012 onwards panda.

I want to look for dashboard dismantling and also a part from an exploded view of the area around the windscreen scuttle.

Does anyone have a copy or know how I can view this online ?

Thanks

Phil

Oh, dear. Problems?

 

[Davren]

Have you tried the eLEARN workshop manual in the forum downloads section here: https://www.fiatforum.com/downloads.php?do=cat&id=14
.

 

[T14086]

Are you stuck try to remove the dash? Removed a few myself so might be able to help.

 

[Avaxbox]

is there any elearn d/l for the Grande punto?

 

[Davren]

is there any elearn d/l for the Grande punto?

Yes.
.

 

[Avaxbox]

Why won't it let me download it?

 

[Davren]

Why won't it let me download it?

I've no idea. Just tested it and it downloads for me.
.

 

[Avaxbox]

Maybe because I am on iPad?


Sent from my iPad using FIAT Forum

 

[Avaxbox]

do you need to download all 8 parts then extract them all?

 

[Avaxbox]

can anyone help? I have downloaded all 8 parts elearn for grande punto and installed and it comes up with insert cd rom into drive. I am using windows 7 do you need to run it on xp? thanks.

 

[Davren]

do you need to download all 8 parts then extract them all?

Yes... you need to download all 8 parts into the same folder, then point WinRar at part 1. That will unzip all 8 parts to an image file named "Grande Punto eLEARN.iso". Use the .iso file to create a CD. (don't copy any files to the CD). Then setup the eLEARN program from the CD. That will create an eLEARN icon on the desktop. Use the icon to start the program. The CD must be in the drive when using the program.

can anyone help? I have downloaded all 8 parts elearn for grande punto and installed and it comes up with insert cd rom into drive. I am using windows 7 do you need to run it on xp? thanks.

It works on Win7.
.

 

[Avaxbox]

sorry how do I make a cd just copy the .iso to a cd?

 

[Davren]

sorry how do I make a cd just copy the .iso to a cd?

No... as I posted above, "don't copy any files to the CD".

Put a blank CD in the drive, then with Windows 7, right click on the .iso file, then hover over "Open with" then select "Windows Disc Image Burner"
.

 

[philboo]

Are you stuck try to remove the dash? Removed a few myself so might be able to help.

Hi T14086

I was going to have a look to see what may be involved to investigate my passenger side rattle behind the dash.

I'll also see if the elearn manual has the new panda in.

Looking quickly underneath, there's a cover below the glove box then I assume the glove box comes out in a similar way to the pre 2012 panda ?

Phil

 

[philboo]

Have you tried the eLEARN workshop manual in the forum downloads section here: https://www.fiatforum.com/downloads.php?do=cat&id=14
.

Hi Davren

That appears to be the pre 2012 model version from what I can see. I want the post 2012 one. Or have I missed it ?

Thanks

Phil

 

[T14086]

I's under warranty so why not let the dealership sort it out?

Yeah glovebox comes out, mind if removing dash as there are screws in the top (open) glovebox facing inwards towards you (2).

 

[deeyup]

philboo in my car it was the heater matrix that was rattling. One symptom was it only rattled when cold, and when the car warmed thermal expansion silenced it.

 

[philboo]

I's under warranty so why not let the dealership sort it out?



Yeah glovebox comes out, mind if removing dash as there are screws in the top (open) glovebox facing inwards towards you (2).

Last time they had it they couldn't hear it. Typically it's bad if going up a hill and the revs build. Sounds like the whole dash on the left is slightly loose.

Thought I'd try to narrow it down for the dealer to then look at ;-)

 

[T14086]

You will need to go back to your dealer and tell them to contact Fiat Technical, they will instruct the dealer as to what to do. (Is there another dealer you can go to?)