Codes showing on Snap On Zeus P010F MAF Sensor A/B correlation. (non Bosch sensor fitted no change)
U0001 Can line High error.
History, bought vehicle with many faults included oil in coolant due to oil cooler, turbo seals/bearings shot, top strut mounts, first gear selection cable? etc. etc.
You can see behind you now and coolant clean and static level.
However noticable black smoke on acceleration followed shortly after with "limp Mode" approx.3000rpm and no black smoke until codes deleted then same again.
Only come back to issues when enough enthusiasm as other vehicles to drive .
Suggestions welcome + pin out readings for MAF sensor to compare with good. Thanks.
U0001 Can line High error.
History, bought vehicle with many faults included oil in coolant due to oil cooler, turbo seals/bearings shot, top strut mounts, first gear selection cable? etc. etc.
You can see behind you now and coolant clean and static level.
However noticable black smoke on acceleration followed shortly after with "limp Mode" approx.3000rpm and no black smoke until codes deleted then same again.
Only come back to issues when enough enthusiasm as other vehicles to drive .
Suggestions welcome + pin out readings for MAF sensor to compare with good. Thanks.