- Joined
- May 8, 2005
- Messages
- 9,053
- Points
- 1,538
can you swap the clocks from the 1999 model into the new 2000 model, the ones that came with the 2000 model are orrible 
Technical 2000 - 1999 clocks swap?
- Thread starter bulldog5046
- Start date
Currently reading:
Technical 2000 - 1999 clocks swap?
your getting as bad as uno_94
OP
OP
- Joined
- May 8, 2005
- Messages
- 9,053
- Points
- 1,538
custard boy said:your getting as bad as uno_94
i feel it aswell, dont have any marea owners on msn to ask, so flood the forum 
Maybe, can't say I've tried!
You got a pic of the 2000-on ones, are they like the Bravo/a?
You got a pic of the 2000-on ones, are they like the Bravo/a?
OP
OP
- Joined
- May 8, 2005
- Messages
- 9,053
- Points
- 1,538
hidious compared to the ones in the 1999
The odometer is located in a different place on a 1999 clock, will that cause a problem? The speedo is also set up very differently
http://cgi.ebay.co.uk/1998-FIAT-MAR...4618499316QQcategoryZ9843QQrdZ1QQcmdZViewItem
This is the best pic of 199 clocks i could find
This is the best pic of 199 clocks i could find
This post contains affiliate links which may earn a commission at no additional cost to you.
OP
OP
- Joined
- May 8, 2005
- Messages
- 9,053
- Points
- 1,538
i think it would be a trial and error thing, i have UT clocks in my uno and the speedo works fine, hooked up the revvy and thats good, fuel and temp are also fine, assuming the connections on the rear of the unit are the same i cant see any reason for them to not be compatable
Speedo is electric, so there's no cable positioning to worry about. Looks like they swapped to Bravo ones for the later models then, mine have the dials in Applesei's ebay find.
