1301cc won't go grrrrr

[unowho]

After rebuild engine ran fine for 50kms then started to run rough for a bit and now wont start unless with full throttle and even then wont run well. Have checked cleaned and rechecked everything and can only think of the problem being the "Idle cut out device" malfunctioning on the carby. Any suggestions???

 

[volxstu]

Hi welcome to the forum, sounds like a false reading from one of the sensors causing the erratic behavior. Could be a sensor or something worse causing the faulty readings. Pop over to the relevant section and post there they should be able to help you more.