Hiya i have bought a locking system from ultimate car parts for my Punto Mk2 3 door link below
http://www.ultimatecarparts.co.uk/remote-car-alarm-immobiliser-latest-2010-anti-hijack-p-118.html
i have read that most puntos have a negative locking system
below is the wiring diagram(if you click the photos they enlarge)
i have connected the power and grounded it only i have not connected the siren or the rest of the wires as im a little confused where they go
here is the second wiring diagram
could someone please adivise where i put all these wires as i have tryed the yellow and yellow black wire grounded and then attached the white wire from the alarm system to the purple and blue wire which is i read it right is the unlock and the white black to the white and green wire and still no luck
and i have also tryed the black and light blue wire too with no such luck i have tryed to adapt other guides so i have not connected the orange or the orange and black wires to anything and grounded the yellow and yellow and black wires to a ground point.
Any help would be much help indeed i have spent lots of time in the cold trying to work this out
Thank You
Phil
http://www.ultimatecarparts.co.uk/remote-car-alarm-immobiliser-latest-2010-anti-hijack-p-118.html
i have read that most puntos have a negative locking system
below is the wiring diagram(if you click the photos they enlarge)
i have connected the power and grounded it only i have not connected the siren or the rest of the wires as im a little confused where they go
here is the second wiring diagram
could someone please adivise where i put all these wires as i have tryed the yellow and yellow black wire grounded and then attached the white wire from the alarm system to the purple and blue wire which is i read it right is the unlock and the white black to the white and green wire and still no luck
and i have also tryed the black and light blue wire too with no such luck i have tryed to adapt other guides so i have not connected the orange or the orange and black wires to anything and grounded the yellow and yellow and black wires to a ground point.
Any help would be much help indeed i have spent lots of time in the cold trying to work this out
Thank You
Phil
Last edited: