Grande Punto The New Guy's Red Multijet

Reuuk · Oct 20, 2013

yeah cut that as close to the box wall as you can as it is quite restrictive

Ryan D · Oct 20, 2013

Reuuk said:
yeah cut that as close to the box wall as you can as it is quite restrictive

I tried ill get a pic up and show you! just buying some 9mm grommets as im gonns drill the underside of the airbox and the body panel side and the grommets are incase I dont like it haha

Ryan D · Oct 20, 2013

infact scrap that idea I may if theres enough space I might add another cold air feed pipe from the front bumper to the bottom half of the airbox? anyone done this before?

Reuuk · Oct 20, 2013

could use cold air ducting to change the route

Ryan D · Oct 20, 2013

Reuuk said:
could use cold air ducting to change the route

yeah seen a few different ones thinking about 60-70mm ducting from the un used intake trumpet on the right hand side hen route it to the airbox as well as the standard intake. so it will be 2 cold air feeds...

Ryan D · Oct 21, 2013

so my egr valve blanking plate came thru the post today. it has a single hole. in the middle as im told this could help the EML. if not ill order a fully blanked plate. needing some help fitting it not entirely sure how to do it?
thanks!

Reuuk · Oct 21, 2013

@Ryan D i put mine where the 'red' plate is, this is located at the back of the engine. ps. its a pita so good luck

not hard just fiddly because of its location

Ryan D · Oct 21, 2013

Reuuk said:
@Ryan D i put mine where the 'red' plate is, this is located at the back of the engine. ps. its a pita so good luck not hard just fiddly because of its location

**** loiks fiddly haha! so basically xouple of bolts out..catch the gasket. put the plate and gasket back in and bolt bsck up?

Reuuk · Oct 22, 2013

yeah

Its an easy job just fiddly because of the location.

What I did was disconnect the exhaust pipe at the bottom (most furthest away down the back of the engine) took the egr completly out the car and cleaned it whilst I had it out

Mjet220 · Oct 23, 2013

Ive got one where the 8v is, is this ok

Reuuk · Oct 23, 2013

TJet180 said:
Ive got one where the 8v is, is this ok

Yeah it's down to preference I guess. I put mine before the ear so it won't get clogged up

Mjet220 · Oct 24, 2013

I might pop another down there

Ryan D · Oct 26, 2013

New mod...massive spend

Ryan D · Oct 27, 2013

Don't know where to post this so ill put it in here. I downloaded the FF app and it won't let me put a space in my login name therefore cannot log on?
Help please haha

Ryan D · Oct 31, 2013

snap of my new cheap mod. not to everyones taste but my car i like it

i know i know i need some lows in my life, coilys should be fitted by christmas

also got some vw audi group number plate surrounds just to be different hopefully get them on today and upload a pic!

*awaiting hate on tow strap*

ANF · Oct 31, 2013

Ryan D said:
https://www.fiatforum.com/gallery/showphoto.php?photo=111767

snap of my new cheap mod. not to everyones taste but my car i like it
i know i know i need some lows in my life, coilys should be fitted by christmas

also got some vw audi group number plate surrounds just to be different hopefully get them on today and upload a pic!

*awaiting hate on tow strap*

Lol tow strap doesn't look all that bad, not somthing i would do though. Nice looking car. Love the black alloys.

Only thing I don't like is the tinted fog lights. Standard or a blackish tint would look nicer in my opinion.

Ryan D · Oct 31, 2013

ANF said:
Lol tow strap doesn't look all that bad, not somthing i would do though. Nice looking car. Love the black alloys.

Only thing I don't like is the tinted fog lights. Standard or a blackish tint would look nicer in my opinion.

thanks buddy each to their own

i like the fogs yellow, i always have done on any car i see them on they look spot on haha

thanks mate

ANF · Oct 31, 2013

Ryan D said:
thanks buddy each to their own
i like the fogs yellow, i always have done on any car i see them on they look spot on haha

thanks mate

No problem. As for the tow stap, it gives it a sort of rally look.

I think you need to pick a second colour and stick to it. Maybe work a bit of yellow into the alloys? Paint the calipers yellow

Ryan D · Oct 31, 2013

ANF said:
No problem. As for the tow stap, it gives it a sort of rally look.

I think you need to pick a second colour and stick to it. Maybe work a bit of yellow into the alloys? Paint the calipers yellow

i think when its lowered it will suit the strap ALOT more haha
i have kinda gone for grey with touches of yellow, anthracite alloys and pillars, with some anthracite stickers on the rear window (further up this page i believe) i am thinking of some small yellow touches though just like the yellow air freshner i have haha

Ryan D · Nov 11, 2013

so heres some new bits...well not really haha

my new VW Audi Autohaus Wolfsburg ABT Tuning number plate surrounds

thats it really haha

i also gave it a clean, SRP, and HD wax as the sun was out! heres a side view

and a reflection shot

and an overall shot at a place i like to go to called cadeby view! just past cadeby mile...a mile long road nice and straight...fun. but yeah here it is as it stands today!

thanks for looking!

Grande Punto The New Guy's Red Multijet

Introduction

Anti-lag ftw!

New member

New member

Anti-lag ftw!

New member

New member

Anti-lag ftw!

New member

Anti-lag ftw!

Anti-lag ftw!

New member

New member

New member

New member

New member

New member

New member

New member

Similar threads