-11.jpg

Punto (Mk2/2b) My First Car named Eleanor.

Introduction

My Build Thread

Hey guys i was half way threw 18 when I got my first car. I chose a Fiat Punto 1.2 16V Sporting over a Saxo (y). Cutting a LONG story short i had numerous troubles trying to get this car,Colour,Sporting,6 Speed gear box etc etc. First time on Auto Trader lady was veyr nice was going down to see her on the Saturday. Phoned her up again on the Saturday to let her know In was going down with my dad just after lunch "ohh... im sorry to tell you I sold the car last night" me -> :bang:. So after a other 4weeks waiting a other sporting appear :slayer:. This time was in a car lot so bound to get it. Problem was though it was 400miles away. But my dad said we would travel as I was :mad: about the last time. So phoned the garage up atleast 4 times on the way down. Got there at 4:30. I began looking around for my punto.......... "thats funny i can see a fiat Punto??" So spoke to the manager guy. "Hi im looking for a fiat Punto MK2 Sporting in grey?" "Oh sorry m8 i sold the car at around 4:00. that Point I nearly punched the guy. The guy i was on the phone with had finish his shift at 3:30 and didnt tell his boss we were coming down!! so basically we drove 400miles for a bag of chips. Like the film Gone In 60 Seconds trying to get the GT500 somthing ALWAYS happens.

Three weeks later!. Phoned a guy in Auto Trader and told him i was coming down in the morning. I explained to him the trouble i went threw and he said he would keep the car for me. Picked the car up from the guy I had this face the whole way home -> :D.

THE MODS!!!!!! :slayer:
Believe it or not I already had a picture in myhead exactly how i wanted it too look. Gave me things to think about while trying to get the car. Im studying AutoMotive Refinishing at College. Which is panel beating and spraying. Following that course will be doing a busines course. So i knew i was allowed to work on my car for free/ GET PAID FOR IT :D LOL!.

Few pictures of the car when I bought it paid £1500
Car came with
4 New TOYO T1 ties
Full new Exhasut
12months Road Tax
12Months MOT
New Brake and Brake pads
around 65k on the clock

1245.jpg


2148.jpg


1245.jpg



After a week of getting use to the car. Time to get the picture in my head onto the car. I began working smoothing out the front bumper. P40 was used to fill the bumper with Bodyfiller and Top Stop applied to finish off. I hacked sawed out the front bumper struts to create a giant mouth.

5a.jpg


644.jpg


733.jpg


831.jpg


927.jpg


1038.jpg


Final photo of the front bumper smoothed and bonnet de-badged. Number plate was also moved down to the bottom for a while. Just wanted to complete change the look of the car.

-11.jpg


After around 2 weeks I began on the audio Full vibe install, Flip out DVD player hooked up to the PS2 little bit of Need For speed during lunch ;). Then i was told by my GF and parents to calm down on the spending LOL. so did FOR like a WEEK!. Blue footwell Neon gave the car a nice look during the night. Set of AutoGuage guages filled the A-Piller

-12.jpg


1327.jpg


I had a wee break from modding due to college exams and extra shifts at work (n). But wait...Extra shifts?? More MONEY to spend on the car!! :slayer:. Decide the stupid arial! had to go :D smoothed that off. On the way hoime from college a BMW went past me and i seen its black roof. My brain then clicked :D BLACK ROOF!!. I bought the vinyl of ebay at £60 and got a local guy to fit the vinyl for me.
How the car is looking at the current time

-14.jpg


New alloys will be arriving soon. The auto Guage piller pods are away now though shown in the above pic. Also recently bought a HGT center console. So you can probs guess where the guages are going ;).

Comments and suggestions are all welcome
Re: My First Car named Eleanor

New Alloys BBS Ra's . Just got them Sand Blasted, Powder Coated, Clear Coat and buffed. Might be spraying the inside black with the lip left as it is. Not sure yet though.
1271.jpg

2159.jpg
 
Last edited by a moderator:
BBS Test Fitted to Front

Hey guys fitted my front BBS Today sit Minted. The back end of the car now is going to be tricky. First off the Rear Drum the gold part on the back. Is bigger than the hole on the BBS. But it fitted on the front ok. So took the Gold piece off tried. Still to big. Rear wheels are going to a engineering shop o get 2-3mm skimmed off. The car has had a 50mm drop and im pretty sure my new BBS are going to scrub. As from the photos below you can see they stick out more than my previous wheels. Either stick my rear springs back on the car see how it stands. I think its going to sit far to high if i do that. Or get a set of 35mm lowering springs on the back.

There is a set of 35mm lowering springs on ebay for a grande punto. Will these springs fit my punto?

Here are pictures of the bbs fitted to the front of my car
1272.jpg

2160.jpg

3122.jpg

488.jpg

569.jpg
 
Last edited by a moderator:
Re: My First Car named Eleanor

oh my dayyyyz...they look well good mate(y) love them...the rear alloys yeah just get it machined bore out and will fit :) 50mm drop will be good on them but like you say if they scrub then 35mm will do...im not sure about GP springs tbh

best deep dish i have ever seen...i normally hate them but these look mint mate :) you sir have got very good taste
 
Last edited:
Re: My First Car named Eleanor

oh my dayyyyz...they look well good mate(y) love them...the rear alloys yeah just get it machined bore out and will fit :) 50mm drop will be good on them but like you say if they scrub then 35mm will do...im not sure about GP springs tbh

best deep dish i have ever seen...i normally hate them but these look mint mate :) you sir have got very good taste

Why thank you my dear chap! :p. I drop the car with the bbs fitted and had a fit was like YYYYEEEHHHHH!!!! running about the garden looking properly pretty daft. i do think the standard springs will be far to high for it.The front is perfect its just the back height i think its going to scrub so 35mm springs might work perfect
 
Last edited:
Re: My First Car named Eleanor

You should of got some low profiles and slight stretch, they still look fit as feck though..

Cheers dude i got 4 brand new Avon tires + set of 15" Dots alloys. for!!!!!!!................ £40 :D Took the avons of the Dotz and put them on my BBS. the profile is 195/50/15. I just need a set of 35mm lowering springs for the back and get the rear alloys bored out to 58.1 and im sorted. As for some reason they fit on the front but not the back :bang:
 
New BBS RA Test Fitted!!

Well i got my 5mm alloy spacers threw the post today. Needed a 5mm spacer on the back to allow the BBS alloy to fit flush against the back drum. Omg is wide at the back. The front fits perfectly with no rubbing from what i can tell from the quick test drive around my block lol.

The back arch when noone in the car has around 1cm of clearance from touching the tire at a 50mm drop. Bought a set of 30mm lowering springs. So the back will be raised by 20mm to allow for extra clearance. Just waiting for them to arrive!! :bang:
Still its going to be tight!

Here are preview pics how she is going to stand
1273.jpg


2161.jpg


3123.jpg

The last picture is my favourite picture. Right is standard Out if thats what you call it? And Left is with my new BBS. Big wide rear! (y)
 
Last edited by a moderator:
Back
Top