Broken rear side windows-latch can be fixed by small 0.5 mm tickness -sheet of metal cutted, formed, drilled and painted as on the attached picture.....
Panda (Classic) Rear side windows latch - fix
- Author aca
- Publish date
- Updated
- Article read time 1 min read
Guide information
More in FIAT Cars
-
Panda 2012+ Wiper arm removal Panda 319. I have seen a post asking how these scuttle wiper arm covers come off. Most Fiat plastic bits... -
Panda 2012+ Reversing Sensors fitting (Fiat Ricambi Accessori)Believe me this is going to be easier than reading Fiat's instructions. The setting up section...
-
Bravo Front speaker replacementThis is a guide to replace stock front speakers with aftermarket ones, since for many, original...
-
500 Fiat 500 2008-2009 clutch pedal brokenCarried out a repair to clutch pedal on Fiat 500 2009 where it had snapped at the weld...
-
Tipo Fitting a dashcam to the Tipo. A guide.Here I fit a Nextbase dash cam to my Tipo. I have fitted one before, hardwired in my old Volvo...
More from aca
-
Panda (Classic) How to create bonnet scope from old Printer or similarI really miss one bonnet scope, and usually find lot of dirt into heater box. Lot of problems... -
Panda (Classic) Rear bumper - change (link)If you need to change rear bumper, activate google bar- translate, and click here to step by...