Painting
1. Apply a couple of coats of plastic primer and smooth.
2. Then its a few coats of Hi-build smoothing after every second coat.
3. Same again for the colour coat.
4. ...and for the clear lacquer.
5. The lacquer has to go on within 24 hours of of the colour coat. It is only necessary if you are using metallic paint, but you can use it for a deeper shine with non-metallics.
6. After the final coat of lacquer give it a couple of days to set. You can then give it a final flattening with 1200 wet n dry followed by a polish with 'T Cut' or other polishing paste.
- Next page: Fitting
- Previous page: Final Preparation
