Remove screws and detach
Remove 2 screws as shown above, and slowly pull down light fitting.
- Next page: Replace bulbs
- Previous page: Revealing torx screws
Remove 2 screws as shown above, and slowly pull down light fitting.
Stilo How to change front interior bulbs
- Author TheTank
- Publish date
- Updated
- Article read time 1 min read
Remove 2 screws as shown above, and slowly pull down light fitting.
Guide information
More in FIAT Cars
-
Panda 2012+ Number Plate LampThe basics of accessing the bulb in a Hatch mounted Panda lamp Turn on lights to see which need...
-
500 read this if you are considering any fiat car with a duologic gearboxAfter many months of reading quite literarily hundreds of horror story's regarding expensive... -
500 (Classic) Dynamo/Generator to Alternator ConversionCinquecentisti, Converting your classic Fiat 500 from a dynamo/generator to an alternator is a... -
600 (New) Locating the OBD-2 port on a RHD Fiat 600eThe OBD-2 port of a RHD Fiat 600e is hidden in the glove compartment. When you open the glove...
-
Panda Thermostat replacement 2009 Panda Diesel 169 70BHPSo the car engine temperature was not getting as hot as before. Temperature gauge was not...