Punto (Mk2/2b) getting wires from front of car to a switch inside the car, for a new horn or extra's
- Author dave
- Publish date
- Updated
Guide information
More in FIAT Cars
-
500X 1.4L multiair alternator clutch pulley replacement without removing alternatorThere is a good video to explain how the pulley works, but he shows a reverse thread. In the...
-
500 (Classic) Fitting front seatbelts to a 1968 Fiat 500LMy 1968 Fiat 500L never had seatbelts. It is sooo weird driving a vehicle w/o seatbelts (even... -
Grande Punto LeftHandDrive, the OBD2 port location change.LHD (left hand drive) Grande has a problem with OBD2 port access (especially during extensive... -
Panda 2012+ Number Plate LampThe basics of accessing the bulb in a Hatch mounted Panda lamp Turn on lights to see which need...
-
500 read this if you are considering any fiat car with a duologic gearboxAfter many months of reading quite literarily hundreds of horror story's regarding expensive...
More from dave
-
Croma front wheel bearing renewalIts been a while so i forgot things like tools sizes, but this should be better than nothing... -
Punto (Mk1) How to fill gearbox oillook on front of box you see a plug that needs undoing with a 12mm alan key you fill from there...
-
Punto (Mk2/2b) MK2 H.I.D. Lamp conversionremove all head lamp screws and fuse/relay box screws. remove plug on lamp cover(if fitted)...
-
Stilo how to debadge a grillStilo but it should be a similar process for any car! :thumbsup: Tools you will need: 1...
-
working out offset of wheelsWorking out Offset of Wheels OFFSET To work out the offset the wheel must be measured...