Cinquecento/Seicento Custom Rear Speaker Build for Cinquecento

For a neat look, rear mount the Cone or large speaker and push fit the tweeter from the front. y rear mounting the cone, it also means you can still fold the rear seats down.

Its should then look something like this:

Now its back to the car...

Take your superb speaker boards to the car, along with the staple gun, scissors and velcro tape. Cut the velcro tape into small strips, and staple the soft side to the speaker boards around the edge. (pic)

Next feed any wiring in the direction it needs to go...in this case behind the rear seat to the amp in the boot!

once all the velcro is in place, push the other side of the velcro pieces onto the stapled side and remove the sticky backing.


Now carefully push the board into place, be sure to align it carefully and press it firmly against the bodywork. (trust me on the velcro, ive had my boards in place for a year now, and they are still stuck solid!)

Also make sure the wiring is fed through in an inconspicuous place.

And thats about it!

Have another cuppa, wire it all up and pump out those tunes........Led Zep, Pet Shop Boys, Christmas songs or whatever takes ur fancy!
:slayer:
Enjoy!!!