+
=
General oil return to sump
- Thread starter arc
- Start date
Currently reading:
General oil return to sump
Phoenix3dfx225
New member
- Joined
- Nov 13, 2005
- Messages
- 87
- Points
- 13
oil is going to leak out of that, or is it going to be attached to summat (only messin, its just i dont get on with oil at the mo)
it's for firing oil out of the engine, so it can be like your car(s)
- Joined
- Feb 16, 2005
- Messages
- 5,983
- Points
- 988
Does your sump have any baffles?
Good plan anyway, but those parts just look plain wrong without a nasty coating of dirty oil, scrapes and rust! Get it fitted quick to remedy that!
Kristian
Good plan anyway, but those parts just look plain wrong without a nasty coating of dirty oil, scrapes and rust!
Get it fitted quick to remedy that! Kristian
its got a bit splitting the sump in two, but thats about it. i might not fit this yet. but it had to be done
give it a few coats of hammerite whilst its off
That looks pretty cool, the angle seems bit extreme, but I suppose there are other bits you can fit once you decide to go turbo at later date.
Do Not Mod Your Sump Like This. The Crank Will Hit The Oil Return Unless You Are Very Careful.
ah
- Joined
- Feb 16, 2005
- Messages
- 5,983
- Points
- 988
Yours hit then
How did you find out, not by cranking the enigne I hope....did it make a big mess?
Kristian
How did you find out, not by cranking the enigne I hope....did it make a big mess?
Kristian
see arcs build thread
