right thats excellent, dunno why i didn't spot that when looking at your pics, its really blatant lol..
So now all i need to get is a little t-piece to split the fuel line and some clips to hold it all together.. Any ideas as to where to get the t-piece?

so think this is what i need..

part number MTP002 here

correct?

think fuel lines 8mm iirc will check in a bit for you

thats what i thought, that t-piece is a 3 way 8mm one, so i was basically asking if it was 8mm or if i'm remembering wrong, think aaron said 8mm t'other day

right ok, got another question now lol..

So looking at my diagram that Aaron kindly sent me, its all quite obvious how to install the regulator into the fuel lines but... where does the vacuum hose go to?

you can either split the map sensor hose with a T, or take it off the capped off bit thats prolly on the TB. Doesnt matter, so long as its a feed that leeds to the inelt fannymould.

8mm rings a bell for fuel hoses, i just took the fuel rail to local hydraulics place and asked for a T peice that fitted.

You should already have a T-piece as the fuel line in will be T-pieced from throttle body to 2nd injector.

http://cgi.ebay.co.uk/METAL-T-PIECE...yZ122139QQrdZ1QQssPageNameZWD1VQQcmdZViewItem

arc said:

fannymould.

Click to expand...

haha, fannymould

J333EVO said:

You should already have a T-piece as the fuel line in will be T-pieced from throttle body to 2nd injector.

Click to expand...

Ah yes, very true, silly me lol