I know I had a few questions about fitting Fiat 500 Genuine products and the there were many threads, all were helpful but missing visual instructions.
So after my Original Cindy 2.0 upgrade thought it may be of use to post the official fiat instruction sheets here.
Yes a few are crumpled but better than nothing!
Hope this helps answer fitting questions especially the wing mirrors.
A Bar -
Bonnet Chrome
Once this is on it is stuck down good and proper! So make sure it is properly lined up and centred with masking tape as a guide or you will need fishing line to unpick it and then need sealant!
Wing Mirrors
As previously advised; when un-clipping the mirror start at the edge away from the car not closest to the car. Rest is pretty obvious!
The Leebee
So after my Original Cindy 2.0 upgrade thought it may be of use to post the official fiat instruction sheets here.
Yes a few are crumpled but better than nothing!
Hope this helps answer fitting questions especially the wing mirrors.
A Bar -
Bonnet Chrome
Once this is on it is stuck down good and proper! So make sure it is properly lined up and centred with masking tape as a guide or you will need fishing line to unpick it and then need sealant!
Wing Mirrors
As previously advised; when un-clipping the mirror start at the edge away from the car not closest to the car. Rest is pretty obvious!
The Leebee
Last edited: