- Joined
- Jul 8, 2006
- Messages
- 1,453
- Points
- 233
Hi guys,
I have just bought a fiat panda which will not run for more than a minute, when it does, it runs rough with black smoke, diesel knock etc.
I got these fault codes:
P0110 intake air temp circuit
P0683 pre-heat glow plug signal
P1673 capacitor voltage
P0530 A/C pressure sensor circuit
P0520 Engine oil pressure switch
P0101 Airflow sensor circuit
When I deleted the code and jump started the engine, I rechecked with the examiner and got P0110.
I then deleted it and started again.
There are now no fault codes present, however its obviously still running the same. So the failure is mechanical somewhere.
I need to check the fuel type is correct and then check the engine compression.
If anyone has ideas, please voice them, if not I will continue to report my findings.
I have just bought a fiat panda which will not run for more than a minute, when it does, it runs rough with black smoke, diesel knock etc.
I got these fault codes:
P0110 intake air temp circuit
P0683 pre-heat glow plug signal
P1673 capacitor voltage
P0530 A/C pressure sensor circuit
P0520 Engine oil pressure switch
P0101 Airflow sensor circuit
When I deleted the code and jump started the engine, I rechecked with the examiner and got P0110.
I then deleted it and started again.
There are now no fault codes present, however its obviously still running the same. So the failure is mechanical somewhere.
I need to check the fuel type is correct and then check the engine compression.
If anyone has ideas, please voice them, if not I will continue to report my findings.