Techno100
Member
- Joined
- May 10, 2013
- Messages
- 252
- Points
- 68
The housing positioned in the essential tool mounted gently in a vice
The securing ring removed anticlockwise with half inch drive ratchet.
Housing cap now lifted off
Filter rotate and pull to remove
New filter insert and rotate anticlockwise
Seal shown hanging
Position seal
Replace top cap with respect to correct position of inlet outlet, taking a photo or marking postion before dismantling is a good idea
refit securing ring and assembly tool and tighten to 30nm.
The tool ensures the casing is protected from crushing or overtightening as it will distort rather than accept more torque.
Tool document
http://www.partinfo.co.uk/files/ADK85502.pdf
Can be sourced for sub £18 delivered
It is inconceivable that the housing can be damaged and leak if this tool is used.
I've heard reports of mechanics (even Fiat) saying when asked no we don't have the tool but we know what we're doing
LINK to PART I
The securing ring removed anticlockwise with half inch drive ratchet.
Housing cap now lifted off
Filter rotate and pull to remove
New filter insert and rotate anticlockwise
Seal shown hanging
Position seal
Replace top cap with respect to correct position of inlet outlet, taking a photo or marking postion before dismantling is a good idea
refit securing ring and assembly tool and tighten to 30nm.
The tool ensures the casing is protected from crushing or overtightening as it will distort rather than accept more torque.
Tool document
http://www.partinfo.co.uk/files/ADK85502.pdf
Can be sourced for sub £18 delivered
It is inconceivable that the housing can be damaged and leak if this tool is used.
I've heard reports of mechanics (even Fiat) saying when asked no we don't have the tool but we know what we're doing
LINK to PART I