Hi had a look on the guides but no guides available for removal and re-fit new front wishbones to my stilo any ideas 1.9 jtd hatch
Technical wishbones
- Thread starter seboni121
- Start date
Currently reading:
Technical wishbones
If you mean lower arms, remove the nut for the bottom ball joint, and with a help from a mate, use a lever under the chassis somewhere and get them to press down on the lever and in turn pressing down on the lower arm, at the same time, hit the ball joint locating thing on the bottom of the hub with a hammer until it comes free, it will take a good couple of whacks to get free but it will come, after that, there will be 2 bolts at the front and rear of the arm.
