General Wishbones

[rab10000]

does anyone have a link for replacing the front wishbones??

anyway do i need any special tools to replace the wishbones???

also do i need to remove the hub etc been told dif stories about replacing them, dont wanna start a job to find out i dont have tools to finish the job.

also do i need any other parts when fitting wishbones like ball joints etc??

 

[JTDman]

Virtually the same

http://myweb.tiscali.co.uk/arocderbyshire/alfaromeo155/index_page/05_Technical/2_wishbones.htm

 

[rab10000]

cheers big man so i may prob have to get myself a ball joint splitter,

what about these bolts are they likely to shear off or they too big to shear off, gonna start soaking in some wd40 tomorro and try replace them on sat

 

[JTDman]

The problem is on th captive nut on the wishbone itself, if you buy cheap aftermarket ones (which i did) the captive nuts are not as thick and can strip its thread really easy.
Never had a problem with my bolts though.

 

[rab10000]

so they should come off no bother just may have a problem re fitting them i was dreading the sheared bolt head on them