Wiper Motor Help

[Nick]

Hey guys, my Wiper motor went ages ago and ive finally got a replacement and tomoz is the big day that im gunna try and fit it,
As this is really the first time ive ever tryed to anything remotly mechanical to any car is there any chance sum1 cud help me out with a guide or and hints or tips, They wud be greatly appreciated and rewarded with beer and one of this years meets

 

[Anonymous]

do a search it bin done b4

 

[Joske]

If its the rear wiper this will help...

http://www.fiatboo.co.uk/fix-a-bravo.htm


If its the front.....

1. Remove Front Wipers. Theres a cap on each arm, remove to find the bolt holding them on.
2. Open Bonnet and remove the rubber on the scuttle panel.
3. Unscrew all the screws, i think there are 6 under the bonnet and two can be found in the corners of the windscreen hidden under plastic caps.
4. Gently pull off the plastic scuttle panel, its in two pieces. They are secured by silly plugs which seem to snap when removed. Being careful you may remove it without breaking anything.
5. You now have access to the motor. Get a socket on it and remove.

Think thats about it. Haven't done it for years now but its not too hard.

So Good, Fiat Want It Back!