General Window frame part

[phoenix1]

Hi this is a long shot but just finishing off my 500 L and I am short of the piece that goes between the quarter light and the drop glass. I have a piece of aluminium in now but when you have the window down you can see the slots. (its a piece of shelving bracket support).
Whilst I am on I have an alternator and a few other bits on ebay and I will be putting an electronic ignition module on tomorrow (Friday). I thought mine had stopped working so I bought another only to find out it was ok .
The rear bumper on my 500 has the holes for a towbar god know what the previous owner pulled.

 

[F123C]

Is this the part you need? :-

www.fdricambi.com/en/fiat-500/door-parts/rr1028-sliding-window-guide-in-quarterlight-fiat-500-600

If it's not, click on the small image below the main image on the above webpage to see the make-up of the quarterlight assembly and use this to show which part you require.
If what you need is the metal part that carries the rubber guides for the drop glass, afaik this only comes as part of the 1/4 light frame.

Al.

 

[phoenix1]

Thanks for that it is the metal part I need. I think I will leave as is for now no one would really notice. Bryan