General Which OBD connector?

[Scotty100hp]

Hello all,
First of all apologies, I’m sure this has been asked many times before but am struggling to definitively find which cable I need to use Multiecuscan on my new (to me) Punto 1.4 GP. I have a ELM 327 connector which works fine with my 100HP, but if anyone could link me to what I need for the Punto it would be much appreciated.
Many thanks.

 

[ceecff]

Hello, can you be more specific with car model Grande Punto 1.4 N/A or T-Jet? hp? year?

 

[Scotty100hp]

Hello, can you be more specific with car model Grande Punto 1.4 N/A or T-Jet? hp? year?

Hi, sorry it’s a 1.4 16v Multiair Evo from 2011.
Cheers

 

[Mike1alike]

I have a ELM 327 connector

Does it not work on Punto?!

 

[ceecff]

Ok then with ELM327 and yellow adapter you can do all.

 

[Scotty100hp]

Does it not work on Punto?!

Apparently not.

 

[Scotty100hp]

Ok then with ELM327 and yellow adapter you can do all.

Great, thanks.

 

[varesecrazy]

Look on the MES site,

The Supported Vehicle list at the bottom

Tell you Which cable to use For Each module

 

[PuntoHowTo]

I seem to think for most stuff on my 2011 Punto Evo, I had to use a Vagcom Lead and then some adaptors if needed**

** you can get a vagcom lead with a switch to manually switch the pins to be compatible with the adaptors so the adaptors are not always needed.