General Wheel Locating Stud Spigot

[gholian]

Hi,

I am looking for two of these wheel locating stud/spigots for my Uno. It fitted on the rear wheel drum. Wheel sits on it to align wheel with bolt holes on drum. There is one seller on ebay with them but for 2 and postage to Southern Ireland it is nearly £15. Crazy for effectively 2 bolts. Was wondering would anyone know where I could order these from UK with sane postage costs.

Thanks.

 

[Davren]

The same type of locating stud fits numerous Fiats from the same era as yours and most later models. A breaker's yard may be your best bet. Alternatively, most Fiat dealers will either have them in stock or be able to order them at about £2 each.
.

 

[gholian]

Okay, Thanks for that. If they are the same on the Punto's then should be loads of them in the breakers yards.

Thanks.

 

[wrightyy]

Okay, Thanks for that. If they are the same on the Punto's then should be loads of them in the breakers yards.

Thanks.

You'll need a 12mm spanner or deep socket to remove them

 

[johorridoh]

I noticed that there two types of threads available on these locating studs.

 

[gholian]

Yes, it's an M8 with 12mm socket. I have an old hub so will bring that with me when I go to Scrapyard. Think it's a 1.25mm thread on mine.