General Welding parts needed Ducato 244

[Parkhave]

Hi everybody.
I am in need of an inner front wheelarch for my restoration.
I can get the outer one.

I have attached a pic and a video.
If you have any knowledge where to get it OR have actually bought it, I would be very very thankful.
I do not have the skills or tool to make it by hand.

 

[Bjbrownie]

You could try Coastal Motorhomes, there’s also quite a few parts suppliers on eBay, many situated in Poland but don’t let that put you off.

 

[Parkhave]

You could try Coastal Motorhomes, there’s also quite a few parts suppliers on eBay, many situated in Poland but don’t let that put you off.

I did find otherwise unobtainable spareparts at Ricambi-auto, but not these.
Turns out I might get them from Citroen instead.

 

[Bjbrownie]

I did find otherwise unobtainable spareparts at Ricambi-auto, but not these.
Turns out I might get them from Citroen

The bodyshell is shared by a few manufacturers so it might pay to check around them

 

[Parkhave]

The bodyshell is shared by a few manufacturers so it might pay to check around them

Just got a call from an intelligent spareparts guy from Citroen.
He is capable of ordering both sides.
Yahoo

 

[DobloPanda]

Just got a call from an intelligent spareparts guy from Citroen.
He is capable of ordering both sides.
Yahoo

I know this was two years ago now, but do you have a part number? Maybe some finished pictures of the job? Thanks

 

[Parkhave]

I know this was two years ago now, but do you have a part number? Maybe some finished pictures of the job? Thanks

I actually have both. I will have to look around my photos and videos for them though.

 

[DobloPanda]

I actually have both. I will have to look around my photos and videos for them though.

Thank you, I'm doing the same job now, outer arch and inner. A replacement panel for the inner would be amazing!

 

[Parkhave]

At long last, I was able to find the photos for these spareparts.

Before picture

Preparing to weld it on

All welded on right side

Ready to apply sealing

Outer arch also in place

From inside

And of course - onto the left side as well

 

[DobloPanda]

At long last, I was able to find the photos for these spareparts.


View attachment 469720


View attachment 469721

View attachment 469722

View attachment 469723

View attachment 469724

Before picture

View attachment 469725

Preparing to weld it on

View attachment 469726

All welded on right side

View attachment 469727

Ready to apply sealing

View attachment 469728

Outer arch also in place

View attachment 469729

From inside

View attachment 469730

And of course - onto the left side as well

View attachment 469731

Thank you so much, so helpful! I will search the part numbers and see if I can find one! Great work.

 

[Parkhave]

Thank you so much, so helpful! I will search the part numbers and see if I can find one! Great work.

You are welcome. If you replace the outer wheel arch also, be sure to adjust the inner, so it matches with the new outer. Otherwise the outer will probably not align.
I have a video of that, but unsure if I can upload it here. Will try to make a smaller one a bit later one (just getting ready with a bunch of small mods before going on holiday.)