Hi since my car was converted from a 1 litre to a turbo the one thing which i have never bothered to fix were my front windscreen washer jets not working, i assumed it was due to the bottle being empty as the pump does work when i pull the lever forward on the control stalk however no water sprays out. Ok fine so i thought maybe i'll fill the bottle today and clean the nozzle but still no joy, so i decided to take off the scuttle cover and what i found is that the washer bottle has two ports to connect the loom to but i have an extra connector which is disconnected, i tried connecting this one to the washer bottle instead but still not working.
Two of the ports from the loom have black and brown wires and the third one has red and blue wires i think. Can anyone tell me which ones should be on the bottle and where this third connector goes to?? i found that having both connectors witht the brown and black wires on the bottle makes it go completely dead
Any ideas??
Thanks
F R O $ T Y
Two of the ports from the loom have black and brown wires and the third one has red and blue wires i think. Can anyone tell me which ones should be on the bottle and where this third connector goes to?? i found that having both connectors witht the brown and black wires on the bottle makes it go completely dead
Any ideas??
Thanks
F R O $ T Y
Last edited:
