Untitled

[donny lad]

well here is some pictures of the new car.
i cant believe how clean it is. the bloody wishbone is stuck on and is only 1 bolt away from cumming off but it is the bolt that somebody else has rounded off lol, i really wish i could keep this car its that tidy and i think im gunna keep the bumper cos its a lot nicer in real life.

this is for ale by the way, if you make me a sensible offer its ure.

 

[Yogi]

Dont suppose your selling a passenger fog light that will fit my 2000 bravo HLX?


Yogi

 

[scotty]

I new you had been playing with it,as you havent been posting for a wee while BIG SMILEY.
Donny can you tell me what i would need to put the HGT brakes on my car???HUB, HUB CARRIER ,are the drive shafts the same will the strur bolts be in the same place on the hub carrier?? ETC.
Cheers Scotty.

 

[donny lad]

ive got a spair set as im using my holes for brake ducting,

scotty mate ive got all the stuff you need but dont know if the drive shaft ares the same, i should imagine the hubs will fit onto your wishbone but you would need put hgt shockers or plates to put in the gap between the hub and the feet on the shocker because the hgt bolt feet are wider, iam sure the spindles are the same just might be a longer lengh on the hgt allthough it would look pretty cool with wide span wheels if you could get some hgt drive shafts.
hope that helps mate ive done more than pla ive already got half the engine out lol but im stuck on the bloody wishbones last bolt it has rounded off.

also to the kid who wanted the fuel rail its ****ed mate the bolt holes are snaped.

more pics to come when im finneshed playing.

justin the battery is eld down by a strap and if they are still ok the coil packs were soaked in 2 " of oil lol i dont think it will make any diiference anyway. im nipping to the post office at 3 when our lass gets back from supermarket.
call it £35 mate for the hassle.

 

[donny lad]

what ya think then untill i get the coilovers on?

 

[scotty]

HHHmmmm cant be ars*d with all that,back to the drawing board me thinks.
Donny nip down to argos and get a set off axel stands there only £15.00 or something,you can get the car mutch higher of the ground, using your trolly jack and wooden spacers and it will be a lot safer,that slope and just the brick makes me nervoise lol,the higher it is can sometimes mean the diffrence between getting something off and not just by gaining that wee bit extra room for leveredge.
I dont mean to sound like im lectureing you lol,just some tips.
And if the nut is realy rounded, NUT splitter, or the trusty old angle grinder.
BIG SMILEY
Cheers Scotty.

 

[donny lad]

lol i know mate when i looked at it a put a fucit on it lol not even im that daft lol well its nearly all stripped under the bonit and cant wait to get the inlet an head off lol thats when the real N/A power starts and before anybody says buy a 20vt i will do that next year i just want to push it as far as possible and believe it can do more than 200bhp, if im wrong then so be it but there isnt any thing wrong with trying lol tis a shame im braking this cos i thought it looked mint red, am thinking of having mine sprayed red with a flake in it.

 

[paul]

lol donny was the guy u bought it off wearigna burberry cap?

check that exhaust!! lol PHAATTT

 

[donny lad]

cmon mate its no more chav than ures, is it lol if th guy liked it that is whats iportant, i baught it cos it was an absolute bargain lol

 

[paul]

mines got my imagination and creativity and i have thought about everything i have done to it and had it done 110% properly ask any 1 who has seen it i never stuck a phat jap can on its arse or stuck some stickers on it.

 

[mick calvert]

yeah but mate you just said what i said you have done the car how you wanted lol its not a jap exshuast any ways lol it is just a 4 inch pipe lol