Technical Uno tuning settings

[Stonne]

Hi, does anyone have the tappets & ignition timing settings for a 1989 Uno 45, 900cc. thanks Peter

 

[jug]

try the uno section

 

[UnoMia]

Hi,
Here are the tappet settings for the 900cc motor:

Inlet: 0.40mm

Exhaust: 0.50mm

Ignition timing: 5 deg BTDC at idle, (vacuum disconnected).

These are per the Haynes manual.

Hope it helps.

 

[alexGS]

This is a cross-post - see previous thread at https://www.fiatforum.com/uno/152565-uno-tune-up-settings.html

UnoMia, those settings are for the 999cc FIRE engine - as it turns out, Peter has a 903cc pushrod motor

-Alex