hi, does anyone know where i can get the 90 degree water pipe which is on the turbo (union type fitting)i'll try and put pics up tommorow.
its a mk1 by the way
cheers
its a mk1 by the way
cheers
Technical turbo water pipe
- Thread starter gdrake88
- Start date
Currently reading:
Technical turbo water pipe
Members market, ebay, scrap yard?
Think Mark had mine (mk1oldskoolunoturbo), but seem to remember he was only going to use the other one (the kind on elongated U one).
If you take a pic there's a good chance i may have one
OP
OP
yes i have one
OP
OP
would you be will to sell it? what condiction is it in?
yes i will sell it, its not new but its in usable condition, i'm not back home til thursday so you can come collect it any time after then
peterfirecat
New member
Don't suppose anyone else has one of these pipes - my car is off the road until I can get hold of one.
Does anyone know if some of the newer Fiats with Turbos use this same part? If so, would a dealer be able to supply one still?
Thanks
Peter
Does anyone know if some of the newer Fiats with Turbos use this same part? If so, would a dealer be able to supply one still?
Thanks
Peter
Found that Mark didn't have it.. he took just the other so I do have a spare
which Pete with firecat are you? the Stoke Pete, or the other one?
which Pete with firecat are you? the Stoke Pete, or the other one?
Last edited:
peterfirecat
New member
oops - looking at the photo again, I think I need the other ali hose - the one that has 2 bends in it. The hose I need attaches the turbo to the block via a rubber hose. The hose I need is attached to turbo via a union that has a 16mm thread.
Thanks again
Peter
Thanks again
Peter
that's the one Mark took - the water hose with two bends.
I can see why they brake.. that short rubber hose is a right pain to fit when in the Uno's engine bay, don't know what the space is like in the Firecat can only guess same or worse.
I can see why they brake.. that short rubber hose is a right pain to fit when in the Uno's engine bay, don't know what the space is like in the Firecat
can only guess same or worse.
Just had a look and seen that the turbo to header tank (top pipe) has 1 bend, so the block to turbo water pipe is the one that has 2 bends.
I found it near impossible to get these pipes. Even the good ones are well and truly stuck in the old turbos. I snapped off a couple and gave up.
I made an aftermarket one
http://turbo124.com/forum/download/file.php?id=938
I made an aftermarket one
http://turbo124.com/forum/download/file.php?id=938
would it be on shop4parts.co.uk at all?
Steve- that looks really cool
Steve- that looks really cool
