Stephen Carr
Member
Hi Guys, hopefully youve seen the start of my build diary in the blog section.
Looking for some advice for the internal engine bay area
1) If i was to swap out my cam any recommendations on what to and any part numbers
2) Fuel Pump, im looking at a facet fuel pump which runs at 2.5 to 4 PSI, What does the standard 1.1 SEI pump run at any ideas
3) Skim the head
4) Using Bike Carbs off a Kawasaki ZZR600 with a specially made inlet manifold of Bogg Brothers
5) any other ideas that i can use.Engine has to stay below 1140cc capacity
Looking for some advice for the internal engine bay area
1) If i was to swap out my cam any recommendations on what to and any part numbers
2) Fuel Pump, im looking at a facet fuel pump which runs at 2.5 to 4 PSI, What does the standard 1.1 SEI pump run at any ideas
3) Skim the head
4) Using Bike Carbs off a Kawasaki ZZR600 with a specially made inlet manifold of Bogg Brothers
5) any other ideas that i can use.Engine has to stay below 1140cc capacity