Technical Throttle potentiometer

[57mmStroke]

Hi
Multipla JTD105 2000
Can anybody please elaborate on the throttle potentiometer connector modification (I remember somebody mentioning it on one of the threads but could not find out more info) and where that can be found on the car?

In addition: I had the cars fault codes read and they are:
1.Incoherence between phase and revs
2. Throttle potentiometer sensor 2
3. Diesel pump
4. Diesel pressure regulator
5. Key code
6. Main relay.

Car starts and runs but is quite poor on power.
Please feel free to comment.


Thanks!

 

[equaliser]

I believe it involves soldering the wires directly on the sensor and doing away with the connector but don't quote me on that as I have never done it! 'T' would be best to comment on this.

 

[T14086]

I renew potentiometer then solder connectors.Some are easy (depending on model/year) some involve soldering upside down under the dash!

 

[57mmStroke]

Who supplies new potentiometers?
Is it a case of OE only or are there any good pattern ones?

 

[T14086]

Who supplies new potentiometers?
Is it a case of OE only or are there any good pattern ones?

due to the akwardness or removing/refitting them & the fact you have now soldered the connections (make a note because different coloured wires on either side of connector) I'd only use OE.

 

[57mmStroke]

Cheers.
Done it.
Injector light went out. (for now at least). Car is powerfull again.
Thanks