Technical Tempra bleeding sequence

[albert.attard]

Hi all, Can somebody indicate the correct sequence to bleed my Tempra 1.9D breaks? Thanks

 

[s130]

Hi all, Can somebody indicate the correct sequence to bleed my Tempra 1.9D breaks? Thanks

The general accepted practice (if no other specific information is available) is to start with the longest brake line run first. Get this clear and then proceed to the next longest and finally down to the shortest run from the master cylinder/ABS pump.

In really troublesome case one may have to go round again.

When I've had really bad bleeds then after the second round I revisit the longest run again to check that it is still clear.

 

[AAA574]

Hi Albert,

If your rear brakes are fine, you need not to bleed them however if need be:

Bleed the rear passenger side first, then the rear driver side. THe order of the fronts does not make any difference.

Regards.